| More parts by American Muscle |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| AM 34561 Steel tie rod adjusting sleeves 9/16-18 thread CNC machined with the latest technogoly to ensure the highest levels of quality. Includes hex jam nuts to lock it in place aftersetting. fits body styles A, B, and E |
| AM 34561-A Aluminum tie rod adjusting sleeves 9/16-18 thread CNC machined from 7075-T651 aluminum with the latest technogoly to ensure the highest levels of quality. Includes hex jam nuts to lock it in place aftersetting. Take some weight off that heavy car. Approved for street use. fits body styles A, B, and E |
| AM35411 When you are restoring your mopar how many times have you twisted the ends off your orginal cam bolts? Chrysler cam bolt assemblies for A, B and E bodys. These are machined from Grade 5 steel for accurate setting of your front end geometry. (set of 4 |
| AM 35613 "C" body Chrysler torsion bar adjusters Save by buying a pair |
| AM 35612 A, B and E body Chrysler torsion bar adjusters Save by buying a pair |
| AM 23461 Here is the tool you need to remove those frozen and rusted torsion bars. Release the tension on the torsion bar, clamp this tool on and hammer away! Fits bodys A,B,C and E |
| AM 23459 Lower ball joint stud remover Bodys A,B,C and E |
| AM23441 Rebuid your upper contol arms to better than new. Using this Upper control arm bushing sleeve installer. Fits body style "B" |
| AM 23450 What goods the tool, without new bushings to install? Fits "B" body style and press into the rear bushing to provide a tighter fit. .003" - .005" press |
| Ball joint sockets for A, B, C, and E |
| AM 23456 Upper ball joint socket used to remove the upper ball joint, which is threaded into the upper control arm. Body style "A" |
| AM 23457 Upper ball joint socket used to remove the upper ball joint, which is threaded into the upper control arm. Body style "B" |
| AM 23458 Upper ball joint socket used to remove the upper ball joint, which is threaded into the upper control arm. Body style "c" |
| AM 23471 "A"-"B"-"E" body AM23471-C For "C" body Upper control arm bushing remover and installer. |
| AM23481 Upper ball joint stud remover Body style A,B & E |
 |
 |
 |
 |
| AM34574 Pivot Pin set for B,E bodys using "Rubber" Bushings |
| AM34572 Pivot Pin set for "A" bodys using "Rubber" bushings |
| AM34573 Pivot Pin set for "B,E" bodys using "poly" bushings |
| AM34571 Pivot Pin set for "A" bodys using "poly" bushings |
| Note: Must Use tool AM23491 Lower control arm pivot pin remover to pull the old pin. |
 |
| Brand New ! Lower Control Arm Bushing Sleeve remover. You need this tool if you are installing Poly bushing in your control arms A-B-E AM23501 $35.00 |